Advance-Tabco  7-PS-50 - Handsink - Spec Line Series - Wall Mounted - With Lever Operated Drain
Advance Tabco makes space saving hand sinks that are easy to install and approved by health departments. One piece bowl construction is a compact 10" x 14" by 5". Keyhole wall mount brackets and one sheet of heavy gauge 304 stainless steel with a satin finish to minimize seams, complete with gooseneck faucet with aerator. Sink comes with a lever waste and built in overflow.

Advance-Tabco  7-PS-80 - Hand Sink w/ Towel and Soap Dispenser
Advance Tabco 7-PS-80 Hand Sink, wall model, 14" wide x 10" front-to-back x 5" deep bowl, 20 gauge stainless steel construction, splash mounted faucet, lever drain with overflow, P-trap, soap and towel dispenser, wall bracket included. The sink is all TIG welded and the welded areas are blended to match adjacent surfaces and polished to a satin finish. The sink bowls have a 2" radii and are rectangular in design for increased capacity.

Advance-Tabco  9-OP-20 - Mop and Service Sink 16" x 20" x 6"
Advance Tabco's floor mounted mop and service sink has a bowl measuring 16" x 20" x 6". Mop sinks eliminate the need for lifting heavy containers and reduce the risk of injury. Made of heavy gauge 304 series stainless steel with a satin finish. All the welded areas are blended to match adjacent surface and have a satin finish.

Advance-Tabco  93-83-60-18RL - 3 Bay Sink with 28" x 20" Bowls with Right and Left Drainboard - 103"
Advance Tabco 93-83-60-18RL Regaline Sink, three compartment, with left and right-hand drain boards, 28" front-to-back x 20" W compartment, 12" deep, with 8" high splash, stainless steel open frame base, side cross rails, 16/304 stainless steel, 18" drain boards.

Advance-Tabco  DI-1-5 - Drop In Stainless Steel Hand Sink 10" x 14" x 5"
Advance Tabco's DI-1-10 drop in sink with a self-rim sink is made with a one piece deep drawn bowl design for seamless construction. Additionally, there is a sound deadening feature. Deck mounted faucet of brass-nickel plate with aerator. Stainless steel basket drain. Sized 10" x 14" x 5" bowl.

Advance-Tabco  FC1-1818-18L - 1 Compartment NSF Sink with 18" Left Drainboard
Advance Tabco's FC-1-1818-18L 1 compartment NSF sink has bowls measuring 18" x 18" x 14" deep and a drainboard on the left. Made of 16 gauge 304 stainless steel with a satin finish. Faucet holes on 8" centers. Backsplash has a tile edge for ease of installation. Sink bowls are 3/4" coved and meet all NSF standards. Adjustable feet standard fit inside the 1 5/8" legs. Ideal for your food prep and vegetable washing.

Advance-Tabco  FC1-1818-X - 1 Compartment NSF Sink with 18" x 18" x 14" Bowl
Advance Tabco's FC-1-1818 1 compartment NSF sink has bowls measuring 18" x 18" x 14" deep. Made of 16 gauge 304 stainless steel with a satin finish. Faucet holes on 8" centers. Backsplash has a tile edge for ease of installation. Sink bowls are 3/4" coved and meet all NSF standards. Adjustable feet standard fit inside the 1 5/8" legs. Adjustable feet standard fit inside the 1 5/8" legs. Ideal for your food prep and vegetable washing.

Cambro  KSC402 - CamKiosk Hand Sink Cart
Cambro KSC402 CamKiosk Hand Sink Cart is a self-contained, electric hand washing system that can be used alone or with CamKiosk Cart. Run hot and cold water for up to 70 hand washings. It has a two compartment stainless steel sink and runs cold and hot water up to 140F. Included are 2 each 5-gallon fresh water tanks and 2 each 7 1/2 gallon waste water tanks, hand soap dispenser and a paper roll holder. The tanks are easy to insert or remove for emptying and refilling. The hot water heater has a 2 1/2 gallon capacity and heats water in 10 minutes. NSF and UL listed.

Franklin Machine  100-1005 - 3" Lever Waste Strainer
Franklin Machine Products 100-1005 3" Lever Waste Strainer is for lever and twist handle waste, 3" sink opening.

Franklin Machine  100-1011 - Lever Waste Repair Kit
Franklin Machine Products 100-1011 Lever Waste Repair Kit contains common replacement parts for all Franklin Machine Products as well as Barnett Premier, Chicago Component Hardware Group, Standard Keil, and T&S Brass wastes. Contains 1 of each: 3” and 3-1/2" flange washers, body bushing, packing nut bushing, plunger-o-ring, coupling nut washer, handle o-ring, twist handle snap ring washer.

Franklin Machine  100-1015 - 3 1/2" Lever Waste Sink Gasket
Franklin Machine Products 100-1015 3 1/2" lever waste sink gasket is for use on Franklin Machine Products as well as Barnett Premier, Component Hardware, Standard Keil, T&S, and Chicago wastes. Fits a 3-1/2" sink opening.

Franklin Machine  100-1024 - Complete Overflow Head
Franklin Machine Products 100-1024 Complete Overflow Head is designed to fit lever and twist wastes with a 1-1/4" overflow outlets. Easy to cut to size.

Franklin Machine  102-1008 - 1" NPS Drain Assembly
Franklin Machine Products 102-1008 1" NPS Drain Assembly is a nickel plated brass, heavy cast drain assembly that includes the lock nut and washer. 1" drain size, 2" flange, 3-1/4" length.

Franklin Machine  102-1044 - 1 1/2" Rubber Stopper
Franklin Machine Products 102-1044 1 1/2" rubber stopper fits 1-1/2" NPS drain size.

Franklin Machine  102-1065 - 1 1/2" NPS Drain Assembly
Franklin Machine Products 102-1065 Drain Assembly is a stamped stainless steel drain assembly that includes a lock nut and washer.

Franklin Machine  142-1113 - Stainless Steel Lever Waste Tool
Franklin Machine Products 142-1113 Stainless Steel Lever Waste Tool is a heavy duty tool for removing or installing lever and twist wastes. Works for both 3" and 3-1/2" sink openings.

Hobart  FD3-150 - Foodwaste Disposer - 1 1/2 HP
There is no substitute for superior design, quality and rugged construction like that of the Hobart FD3/150 waste disposer. It features two hardened stainless steel removable cutter blocks that can be indexed for new cutting edges or replaced through the throat of the disposer. The breaker blade speeds grinding and prevents objects from riding at the center of the flywheel.

Hobart  FD3-50 - Foodwaste Disposer - 1/2 HP
There is no substitute for superior design, quality and rugged construction like that of the Hobart FD3/50 waste disposer. It features two hardened stainless steel removable cutter blocks that can be indexed for new cutting edges or replaced through the throat of the disposer. The breaker blade speeds grinding and prevents objects from riding at the center of the flywheel.

In-Sink-Erator  LC-50 - Light Commercial Disposer - 1/2 hp
The In-Sink Erator LC-50 light-capacity model is commercial-quality through-and-through, yet installs as easily as a household garbage disposal. Designed for light commercial applications such as convenience stores, delis and fast food operations.

In-Sink-Erator  SS-1000 - Disposer - 10 hp - All Stainless
The In-Sink Erator SS-1000 is the largest disposer made by In-Sink Erator and has a powerful 10 HP motor that makes short work of clean-up for stadium-sized crowds. Like all In-Sink-Erator® commercial disposers, it delivers superior performance, quiet operation, maximum energy efficiency and long service life. Designed for continuous operation in locations such as large banquet facilities, large hospitals and university food service.

In-Sink-Erator  SS-150 - Disposer - 1 1/2 hp - All Stainless
The In-Sink Erator SS-150 is the most affordable medium-capacity model, ready to tackle meals of up to 200 persons with its powerful 1.5 HP motor. Like all In-Sink-Erator® commercial disposers, it delivers superior performance, quiet operation, maximum energy efficiency and long service life. Designed for continuous operation in locations such as schools, hospitals, larger restaurants, hotels, cafeterias and nursing homes.

In-Sink-Erator  SS-300 - Disposer - 3 hp - All Stainless
The In-Sink Erator SS-300 is the most affordable large-capacity model, ready to tackle meals of up to 750 persons with its powerful 3 HP motor. Like all In-Sink-Erator® commercial disposers, it delivers superior performance, quiet operation, maximum energy efficiency and long service life. Designed for continuous operation in locations such as large banquet facilities, large hospitals and university food service.

In-Sink-Erator  SS-500 - Disposer - 5 hp - All Stainless
The In-Sink Erator SS-500 is ideal for when you're serving as many as 2,500 persons at one meal. This large-capacity model can handle almost anything including steak bones with its powerful 5 HP motor. Like all In-Sink-Erator® commercial disposers, it delivers superior performance, quiet operation, maximum energy efficiency and long service life. Designed for continuous operation in locations such as large banquet facilities, large hospitals and university food service.

In-Sink-Erator  SS-750 - Disposer - 7 1/2 hp - All Stainless
The In-Sink Erator SS-750 is a large-capacity disposer with a powerful 7.5 HP motor to handle meals measured in the thousands of servings. Like all In-Sink-Erator® commercial disposers, it delivers superior performance, quiet operation, maximum energy efficiency and long service life. Designed for continuous operation in locations such as large banquet facilities, large hospitals and university food service.

Krowne Metal Corp  HS-13 - Hand Sink - Wall Mounted - Electric Faucet & Soap & Towel Dispenser
Krowne HS-13 hand sink is operated with an electric eye. You will never have to worry about dirty faucets and the possible spread of bacteria automatic faucet on the HS-13. The sink also comes with a towel and soap dispenser for added convenience. The faucet runs on a 6v battery that will last 1-3 years based on usage. The 30 second time out helps conserve water and prevents users from leaving the faucet on. All of the seams are tig welded and polished on this sink that is constructed from solid stainless steel.

Krowne Metal Corp  HS-17 - Hand Sink With Soap & Towel Dispenser
Krowne HS-17 hand sink is constructed of one piece of stainless steel with all seams welded and polished. The HS-17 comes with a built in soap and towel dispenser which makes for an easy installation and acceptable setup for health departments. Krowne has included all the parts needed to get your HS-17 sink installed with a drain, trap, and faucets.

Krowne Metal Corp  HS-2K - Handsink - Standard Series - Splash Mounted - Basket Drain
Krowne makes space saving hand sinks that are easy to install and approved by health departments. One piece bowl construction is a compact 10" x 14" by 5". Keyhole wall mount brackets and one sheet of heavy gauge 304 stainless steel with a satin finish to minimize seams, complete with gooseneck faucet with aerator.

Krowne Metal Corp  HS-7 - Hand Sink - Wall Mounted - W/ Soap & Towel Dispenser
Krowne HS-7 hand sink comes with everything you will need to for a hand washing station. The sink comes with a towel and soap dispenser, trap and faucet. The HS-7sink comes with a skirt to hide the drains and sink bowl. All of the seams are tig welded and polished on this sink that is constructed from solid stainless steel.

Krowne Metal Corp  HS-9 - Handsink - Spacesaver Series - Wall Mounted
Krowne makes space saving hand sinks that are easy to install and approved by health departments. One piece bowl construction is a compact 9" x 9" by 5". Keyhole wall mount brackets and one sheet of heavy gauge 304 stainless steel with a satin finish to minimize seams, complete with gooseneck faucet with aerator.

T & S Brass & Bronze  60X - Spout Swing - 8"
The T & S 060X 8" swing spout fits any T & S faucet. Made from brass. Uses series 1 outlets. 2 1/4" " tall.

T & S Brass & Bronze  62X - Swing Spout - 12" and 3 3/4" Rise
The T & S 062X 12" swing spout fits any T & S faucet. Made from brass. Uses series 1 outlets. 3 3/4" tall.

T & S Brass & Bronze  B-0592 - Pot and Kettle Filler Faucet for Ranges
T & S B-0592 Pot Filler Faucet for Ranges is a wall mounted single control faucet with an 18" double joint nozzle. An insulated on-off control grip is on the tip of the nozzle. NSF listed.

T & S Brass & Bronze  B-0605 - Pot and Kettle Filler - Wall Mounted - Single Faucet
T & S B-0605 Pot and Kettle Filler is wall mounted and has a single control. Vacuum breaker is on outlet. Flexible stainless steel hose with hook nozzle and self closing valve. Hold down ring for continuous flow of water. Adjustable flange. NSF listed.

T & S Brass & Bronze  B-0665BSTR - Service Sink Faucet
The T & S B-665BSTR Service Sink Faucet comes with a wall mount and 8" centers. There is 2 3/8" clearance from wall to the center of the faucet and 8 7/8" from wall to center of outlet. This faucet also comes with a vacuum breaker nozzle and 3/4" garden hose thread and pail hook.

T & S Brass & Bronze  B-104-D - Dummy Wall Hook for Pre-Rinse Units
The T & S B-0104D dummy wall hook is for use with pre-rinse hoses in order to keep them secure to the wall when not in use.

T & S Brass & Bronze  B-109 - Pre-Rinse Wall Bracket - 6"
The T & S B-0109 wall bracket is for use for with the T & S Pre-rinse units. This bracket stabilizes piping so as not to break connections and is usually used with the riser tubes.

T & S Brass & Bronze  B-1112 - Faucet Deck Mount - 4" - Center - 8" Swing Nozzle
T & S B-1112 workboard deck mounted faucet comes with a 8" swivel nozzle. This unit is mounted to the deck of your sink. The solid bronze body provides years of durability. 4" centers are make this faucet great for hand sinks. Lever handles make it easy to turn on and off.